Burris XTR Signature Xtreme Tactical 30mm Medium Mounts

Burris 30mm medium Xtreme Tactical Rings XTR Signature ring mounts are manufactured to be both light weight but also extremely durable and stable. They can be used on heavy recoiling rifles to hold rifle scopes in place for long term shot-to-shot consistency. They are securred on to a picatinny rail using the 2 x torx screws located on the side of the mount and the scope is held in place using the 6 x torx screws located on top of the rings.

XTR Signature mounts use unique self-centering dual steel clamps for robustness and durability combined with a high quality robust tactical aluminium ring to save on unneccessary weight.

Not only are these rings great at holding scopes securely in place they also have nylon inserts increasing the ring to tube surface contact area for increased grip on the scope ensuring it does not move under recoil. Burris have made these inserts with built in MOA allowing any allignment issues to be corrected or for substantially more elevation adjustment on a rifle outfit for long range shooting. By using the included inserts a scope can be adjusted in 5 MOA increments from between -40 MOA to +40 MOA depending on what is required.

Height Guide - From Top Of Rail To The Centre Of Tube

Low - 1"
Medium - 1.25"
High - 1.5"

Contents

2 x Burris XTR Signature 30mm Ring Mounts
1 x 0 MOA inserts
1 x +/- 5 MOA inserts
1 x +/- 10 MOA inserts
2 x +/- 20 MOA inserts
2 x Torx bits
Instructions
Hard plastic case to store the unused inserts should they be required on future rifles